ABOUT     |     CONTACT     |     CAREER     |     BLOG     |     For sales & dealership enquiries call icon +91-99718-90006

Tag: Fire safety solution

Common Electrical Panel Problems and How to Solve Them

Posted on by palladiumSS_blog
Electrical Panels distribute power from the leading electrical service to the different circuits throughout your home. Issues with electrical panels may impact the functionality of your electrical system, and they may even represent a safety risk.  To assist you in maintaining the efficient and secure operation of your home’s electrical system, we will cover a few typical electrical panel issues and offer some potential cures in this answer. It’s crucial to remember that dealing with electrical systems may be dangerous. Therefore, it’s better to seek the advice of a licensed electrician if you have any questions or feel uneasy about identifying or repairing your electrical panel. 

Common Electrical Panel Problems and Solutions

There are several common electrical panel problems that homeowners may encounter, and here are some potential solutions:
  1. Circuit Breaker Stumbling Frequently: If a circuit breaker stumbles frequently, it can be due to several reasons. It might be since of an over-burden circuit, a short circuit, or ground blame. To settle this, unplug any appliances or devices on the course and attempt resetting the breaker. Call a circuit tester to analyze the issue if it continues to trip. 
  2. Burnt or Melted Wires: Burnt or melted wires are frequently caused by an over-burden circuit or a free association. If you notice burnt or melted wires in your electrical panel, turn off the power to the affected course immediately and call an electrician to repair the problem. 
  3. Corroded Connections: Over time, connections in your electrical panel can become rusty, which can cause poor conductivity and electrical issues. If you take note of corroded associations, turn off the control to the influenced circuit and clean the joins with a wire brush or contact cleaner. If the erosion is extreme, you must replace the affected components. 
  4. Old or Outdated Panel: In case your electrical board needs to be updated, it may not be able to handle the electrical requests of your household or building. This may cause visit breaker stumbling, control surges, and other issues. Consider updating to a more current, productive show in case your board needs to be updated. 
  5. Loose Connections: Loose connections in your electrical panel can cause poor conductivity, leading to overheating and other issues. If you take note of corroded associations, turn off the control to the influenced circuit and clean the joins with a wire brush or contact cleaner. If the erosion is extreme, you must replace the affected components. 
  6. Buzzing or Humming Sounds: Buzzing or humming sounds from your electrical board might show an electrical issue, such as a free association or a falling flat component. If you listen to these sounds, turn off the control to the influenced circuit and call a circuit tester to analyze and repair the issue.

Conclusion

In conclusion, keeping your Electrical Panel in good condition is essential to ensure the safety and efficiency of your home’s electrical system. Remember that protection is vital when it comes to electrical work. If you experience any common electrical panel problems listed above, it is important to address them promptly to avoid further damage or potential safety hazards. 

The Complete Guide to Clean Agent Extinguishers: How They Work and Which Ones to Use

Posted on by palladiumSS_blog
When there is a fire in your nearby places like in your home, office or any other place, if you don’t have an idea, you got confused, as there are so many Fire suppression and protection devices available in the market, you got confused and don’t have an idea which device is best for you for that current situation.


Every device has advantages and disadvantages; some can be used in open spaces, others can close spaces, some are used in electric fires, and others are used in other kinds. 


In this article, we are talking about the best types of extinguishers on the market called the Clean Agent Fire Extinguishers. 


They are used in situations with a large amount of electrical equipment or sensitive electronics. They are also helpful in cases where the risk of a fire or explosion is high.


They are also a chemical that does not leave any residue behind. This makes it perfect for use where you want to keep the environment as clean as possible. Clean agents are also used in fire extinguishers, which are also called clean agent extinguishers.


A clean agent extinguisher works by removing heat from the fire, which in turn prevents it from spreading. They do not release harmful chemicals into the air, so they are perfect for use with computers and other sensitive equipment.


What is the Difference Between Clean Agent and Regular Fire Extinguishers


Clean agents are non-toxic and non-corrosive gases used to create fires. They work by removing the oxygen from the fire, thus preventing combustion. They are also known as “clean” because they don’t leave any residue or damage in their wake.


Regular fire extinguishers use a water-based solution to put out fires. The water is sprayed on the flames, causing them to cool and die.

Different Types of Fire Extinguishers

There are three types of Clean Agent Fire Extinguishers in the market, and the list is as follows:
 

Cleaning Agent – 2kg


This type of extinguisher is small and can be easily carried around, with having an epoxy-polyester powder coating resulting in anti-corrosive inhibitor properties. This type of extinguisher is semi-portable and can be easily carried by one person. cleaning agent – 2kg has a highly durable stainless steel hose and an epoxy-polyester powder coating for anti-corrosive inhibitor properties. The agent is effective on Class A, B, and C fires and work from -10 degree celsius to 60 degrees Celcius.


Cleaning Agent – 4kg


 This type of extinguisher is double the size of the 2kg extinguisher and comes with a trolley for easy manoeuvrability. It is also semi-portable, with a stainless steel hose that is also highly durable. The cleaning agent 4kg extinguisher is effective on Class A, B, and C fires and can work in temperatures ranging from -10 to 60 degrees. It has a corrosion-resistant cabinet and an adjustable nozzle. The 6kg extinguisher is effective on Class A, B, and C fires and can work in temperatures ranging from -10 to 60 degrees Celsius.


Cleaning Agent – 6kg


Cylinder Length (mm): 430 mm Cylinder Diameter (mm): 178 mm Discharge Hose Length (mm): 1.5 M Discharge Hose Diameter (mm): 25 mm Total Weight (kg): 6.0 Kg (approx.) 


The 6kg extinguisher is the largest of the three and is the most effective. It is also the most expensive. It is made with a corrosion-resistant cabinet and an adjustable nozzle. The cleaning agent-6kg extinguisher is effective on Class A, B, and C fires and can work in temperatures ranging from -10 to 60 degrees Celsius.


Areas Where Clean Agent Extinguishers are Effective & Where they are not Effective


Clean agent extinguishers are often used in areas with a high probability of an electrical fire. For example, clean agent extinguishers are often used in data centres, server rooms, computer rooms, and offices. Clean agent extinguishers are also effective in places with a risk of an explosion, such as chemical plants and oil refineries.


The following places should not be used with clean agent extinguishing systems: kitchens, garages, construction sites or other areas with combustible materials.


Advantages of Clean Agent Extinguishers


A clean agent is a firefighting technique that does not require water from the hose or a fire truck. It usually consists of substances like Carbon Dioxide, Nitrogen Gas, and Halon. These agents can be used in buildings and smaller structures such as homes.


Clean agent extinguishers have many advantages, such as:
  • They are effective on Class A, B, and C fires.
  • They are effective on most types of electrical equipment.
  • They don’t leave any residue or damage in their wake.
  • They are effective in areas with a high probability of an electrical fire.
  • They are effective in places with a risk of an explosion.

Conclusion 

Clean Agent Extinguishers are an effective type of firefighting agent that is effective on most types of fires. They are often used in areas with a high probability of an electrical fire, such as data centres, server rooms, computer rooms, and offices. They are also effective in places with a risk of an explosion, such as chemical plants and oil refineries.


A clean agent extinguisher is an excellent option for fighting fires in places where water-based extinguishers would be ineffective or cause more damage. They are also a good choice for places where you want to avoid leaving a mess or where the environment needs to be kept clean. They are also effective against various fire types, including electrical fires. 


Need Professional Guidance? Contact us Now!


At Palladium Safety Solutions, we provide comprehensive fire safety services. We carry a wide range of fire extinguishers, including clean agent extinguishers, and can help you choose the right type for your needs. We also provide fire safety training to ensure your employees know how to use the extinguishers properly. Contact us today to learn more about our fire safety services!


Different Stages of Fire

Posted on by palladiumSS_blog

Firefighting is one heck of a selfless job because firefighters save more than lives. They save the hearts and dreams embedded in the memories of a home. For Firefighters, to do their job best they have to keep the keen knowledge of the mechanics and thermodynamics of this beautiful flame as it can easily take the form of the destruction.


To get a fire under control, firefighters conduct a short assessment test which dictates all the risk factors involved. For conducting this assessment, it is important to know the different stages of the fire. Identifying the stage of fire helps them to build tactics to cope and manage the fire. Awareness of development stages of the helps teams to understand and

1. find most dynamic extinguishing method

2. minimize risk to firefighting personnel

3. predict the progression of the fire

These four stages of development are- Incipient, Growth, Fully Developed, and Decoy.

Incipient:
Incipient Fire is also called ignition fire which translates to something that ignites initiating the whole chaos. The basics understanding of fire behavior dictates that ignition requires heat, oxygen, and fuel. Once the ignition begins, the incipient fire’s development is dependent on the type of fuel involved. An ignition fire is a flame in its beginning stage. In this stage, fire can be easily be managed by any handy available equipment like portable fire extinguisher cylinders or with buckets of water. The fire wherein the visibility is diminished because of smoke present requires structured firefighting techniques to cope up with. Hence that will no longer will be called Igniting or Incipient fire.

Growth:
Growth is the stage where the more fire load starts getting involved. The oxygen from the air and available flammable or nonflammable things start adding up in the fire load to reach the fully developed stage. The growth stage is affected by many different and common factors like the ceiling height, materials available close by, thermal layering, etc. The indicators of the growth phase include the increase in room temperature, brown stains, and cracks in windows, a layer of smoke above the flame.

Flashover:
Flashover is not one of the noted or sequential stages but it an event that can be defined as the shortest event in the process of Fire development. Flashover potentially traps, injures and kills firefighters. Flashover can occur spontaneously anytime during the growth stage and before the fully developed stage. When the fire reaches the ceiling, causing the whole room to heat up, the ceiling bounces back the fire igniting the flame in everything present in the room to ignite instantly. The textbook definition of flashover is “the near-simultaneous ignition of most of the directly exposed combustible material in an enclosed area.”

Decay:
Decay is the stage when a fire starts to diminishes as it can no more expand because of the absence of fuel and oxygen. Decoy is the longest stage of fire. Firefighters with the help of their equipment force fire to enter into the decay stage by limiting the oxygen supply. The potential danger of this stage includes is the risk and chances of starting a new fire if any potential combustibles are available. Hence this is critical to limit the fire’s access to any new combustible material to reduce the chances of ignition.

The Different Types of Fire Extinguishers and How to Use Them  

Posted on by palladiumSS_blog

Don’t be caught unprepared! Find out the various types of equipment used to put out fires and when each is best suited. Protect your home or workplace today.

To stop a fire, you have five choices: water, foam, powder, CO2, or wet chemicals. Water fire extinguishers help extinguish fires involving paper, wood, and fabric. Foam fire extinguishers are suitable to use on fires with something that can catch fire easily, like liquids and things that use electricity. Powder fire extinguishers can work on many fires, even those with flammable gases or metals. CO2 fire extinguishers work on electrical fires and won’t harm electrical devices because they don’t leave any leftover materials. 

These are the Top Five Kinds of Fire Extinguishers and How To Operate Them

Foam Fire Extinguishers

Maintain a strategic distance from fires by maintaining a strategic distance from materials like paper or wood and combustible fluids like gasoline and oil. To put out a fire with the froth fire quencher, point it towards the foot of the fire and move it from clearing out to the right.

Water Fire Extinguishers

Stop fires using paper, wood, clothes, and things that are alike. Don’t use these fire extinguishers on fires started by electricity or liquids that can easily catch fire. To stop a fire with a water extinguisher, aim at the bottom and move it side to side while staying safe from the fire.

Carbon Dioxide Fire Extinguishers

Put out fires that involve liquids that can easily catch fire and electrical fires. They are called Class B and C extinguishers. To utilize a CO2 fire quencher, point it towards the base of the fire and move it from side to side.

Dry Powder Fire Extinguishers

They can put out different types of fires. They put out fires that are called Class a, b, c, d, and electrical fires. To utilize a dry powder fire quencher, point it at the base of the fire and influence it sideways. Remain absent from the fire.

Wet Chemical Fire Extinguishers 

Wet chemical fire extinguishers are made to extinguish fires in kitchens with cooking oils and fats. Use a wet chemical fire extinguisher by spraying it in a circle onto the fire while staying a safe distance away.

How to Use Them

Employing a fire quencher accurately can rapidly halt a small fire and prevent it from becoming a massive fire that harms individuals.

To utilize a fire extinguisher, there are a few straightforward steps you do-

  • Know What Kind of Fire it is Before Using a Fire Extinguisher: This will assist you in choosing a good fire quencher and prevent the fire from compounding. There are five sorts of fires: Classa, b, c, d, and f. You wish for a diverse quencher for each kind of fire.
  • Call the Fire Department: If there’s a massive fire, instantly contact the fire department. If you have a device to put out fires, it is pivotal to inquire for assistance from individuals who know more than you. They can help on the off chance that the fire gets to be as well huge.
  • Pull the Pin: To use a fire extinguisher, remove the pin that stops the handle from getting pressed accidentally. The hook is usually on the handle’s top part.
  • Aim at Firebase: Direct the nozzle or hose towards the ground, not flames.
  • Squeeze the Handle: Squeeze the handle to release the agent. Keep your hand away from the nozzle to avoid injury.
  • Sweep Side to Side: Sweep the extinguisher side to side while keeping a safe distance from the fire.
  • Check for Reignition: Ensure there’s no more fire by checking for any signs of it happening again. If a fire occurs again, do the same thing you did before.

Conclusion

Crucial to pick a suitable fire extinguisher and use it properly to prevent a small fire from getting bigger and more dangerous. Stay safe and save people’s lives. It would help if you used to stop them and how to use them correctly. Call the fire department and get out fast if the fire is too large for a regular extinguisher.

How do Dry Chemical Fire Extinguishers Work?

Posted on by palladiumSS_blog
The chemical fire extinguisher is the market’s most common fire fighting equipment, mainly due to cost efficiency and effectiveness. It is widely used to extinguish flammable liquid fires, electrical fires and grease fires. It contains a chemical agent known as mono ammonium phosphate. This chemical agent is stored as a dry powder made up of tiny particles, but many types of fire extinguishers are on the market.


When a fire breaks out, the powder does not get extinguished by the heat of the fire. Instead, it gets dispersed in the air, about 15 to 20 feet near the fire. When this powder is exposed to oxygen, it becomes a gas and quickly extinguishes the fire. As the gas blankets the surface of the fire, it causes cooling and suffocation. It absorbs all the heat from the surface of the fire. This way, it prevents oxygen from reaching the core of the fire and hence puts out any possibility of re-ignition.



Classification of Different Fires


Classification of fire into three main categories and all these different types of fires that require different approaches to extinguish them, 

  1. Class A fires involve combustible materials like wood, paper or fabric. The most effective way to put out these kinds of fires is by using water.
  2. Class B fires, on the other hand, involve flammable liquids such as gasoline or oil. These kinds of fires can be extinguished by smothering them with dry chemicals or foam.
  3. Class C fires are electrical and occur when live electrical equipment comes in contact with combustible materials. The best way to prevent these kinds of fires is by cutting off the power supply and dousing it with water or foam.


Types of Material Used in Dry Chemical Fire Extinguishers


Many types of fire extinguishers are available in different price ranges on the market and ABC dry powder fire extinguishers and their three main types of powder used in dry chemical fire extinguishers are alumina-based, sodium bicarbonate-based, and potassium bicarbonate-based. Each type has its advantages and disadvantages, making it more or less suitable for specific applications.
  1. Alumina-Based Powders are the most effective at fighting fires involving highly flammable liquids like oils and petrol, but they can harm some electronics. 
  2. Sodium Bicarbonate-Based Powders are less effective against these fires, but they are much safer for use around sensitive equipment. 
  3. Potassium Bicarbonate-Based Powders fall between the two in terms of effectiveness and safety.
Dry chemical fire extinguishers are typically filled with one of these three types of powder. The type of powder used will depend on the intended application for the extinguisher. For example, an extinguisher in a kitchen would likely be filled with sodium bicarbonate-based powder. In contrast, one designed for use in a garage would likely be filled with alumina-based powder.


Working Procedure Of Chemical Fire Extinguishers


The working procedure of chemical fire extinguishers is relatively simple. When a fire breaks out, the operator needs to point the extinguisher at the base of the fire and discharge it. The chemicals inside the extinguisher will then be released and blanket the fire’s surface, suffocating it and causing it to cool down. This prevents oxygen from reaching the core of the fire and prevents any possibility of re-ignition.


One advantage of using chemical fire extinguishers is that they are relatively safe for use around sensitive equipment. This is because they do not rely on water to extinguish fires, which could potentially damage electronics. Another advantage is that they are very effective against common types of fires, such as those involving flammable liquids or electrical equipment.


However, there are some disadvantages to using chemical fire extinguishers as well. One is that they can harm some types of electronics if misused. Another is that They can also be dangerous to operators if used in enclosed spaces, as the chemicals released can cause respiratory problems.


Advantages of Chemical Fire Extinguishers


  1. Chemical fire extinguishers are relatively safe for use around sensitive equipment, which is a significant advantage. 
  2. They can also be quite effective against common fires, making them a suitable choice in many situations. 
  3. They are generally compact and easily can be placed in different places.
  4. This type of extinguisher forms a spray, one of the most effective extinguishing methods, combining travelling fuel fires.
  5. Please have a great potential to combat temperature and lower it from 200 degrees to 60 degrees celsius.


Conclusion


Dry chemical fire extinguishers are fire extinguishers that use chemicals to put out fires. They are effective against common types of fires, such as those involving flammable liquids or electrical equipment. However, they can be harmful to some types of electronics if misused, and they can also be dangerous to operators if used in enclosed spaces. 

Evaluation Factors to Choose the Top Fire Protection Companies

Posted on by palladiumSS_blog
If you are reading this article, then it is obvious that you are aware of the importance of fire protection which is why you are planning to hire a fire protection company. With multiple fire protection companies in town, choosing the reliable one might sound hard. So in this article, we have come up with some best evaluation factors that will help you choose the top fire protection company. Ensure that the company gets a tick mark of all the features given below. Now let’s get started. Whether you are installing the fire safety system for the first time or have already installed one, and it just requires a regular check once in 6 months or 12 months, you can count on the below-given points. 

Previous Work Records

The most crucial thing you need to check. Though there are multiple fire safety companies are in business for many years, they might have a poor track record. So it is crucial to ask for the previous work records which would talk about their experience. Only if the company has an excellent track record, then it means they have been providing a great service. 

Quality Products and Quality Work

The products here refer to the fire equipment. While hiring a company for fire safety analysis, ensure that the equipment used to check the different fire safety equipment is in good condition. If this equipment doesn’t work correctly, then it would be a waste of time and money. Also, pay attention to the quality of work they do.

Check if the Company Specializes in Fire Safety

Check whether the company’s specialty is fire safety. This is because there are companies that have security equipment and electricians carrying that equipment, but that doesn’t mean they are trained to check fire safety in your house or any place.  A top fire safety company that specializes in fire safety will have in-depth knowledge about what they do, and they also know how to use all kinds of tools. So these people will provide optimal solutions to your needs. 

Price

It is important to consider the price that these fire safety companies quote. But choosing the fire safety companies mainly based on a budget will not fetch you the best service. If a company is quoting a price, first analyze whether their service is worth it. You can consider the experience in this field, the tools they use, etc.  When installing the fire safety equipment for the first time, it will cost you a bit. But it is a one-time investment, and only the maintenance cost will be added in the future.  Installing the fire protection system pricing can vary depending on the number of factors like
  • Size and age of the building
  • Features and functions that need to be tested
  • Off-hour inspection requirements
  • Specialty system testing equipment. 

Other Questions to Ask the Fire Safety Company 

  • How long would they keep a record of fire safety inspections?
  • How much time would it take to produce the final inspection report?
  • Whether you can access the inspection reports online 24/7?

Customer Service

If the company doesn’t respond to your emergency calls, then it will lead to some mishappenings. So the customer service and its response time are very important in this business. So check if the company has strong customer support where the technicians will be available to attend emergency calls 24/7/365. Also, ensure that they can fix the issues all by themselves, or they only offer inspections. 

Final Words

You can also check the reviews of their previous customer to get more info about their work. That’s all about the different factors to check or consider while hiring the top fire safety companies. We are hoping that this article helped you to make an informed decision. Thanks for reading through. Cheers!

Fire Detection and Alarm Systems: A Brief Guide

Posted on by palladiumSS_blog
Fire detection and alarm systems are one of the most important safety measures in any commercial or public building. They are designed to detect the presence of fire and provide fire alerts to the occupants so that they can evacuate the premises safely. In today’s world, they have become an ultimate requirement for the safety of humans and everything that is available on the premises of the buildings including residential, businesses, resorts and a lot more.


Purpose of Fire Alarm and Detection System


The working principle is quite simple and there are two main types of fire alarm systems: fire detection systems and sprinklers. fire detection systems are the most common type of fire alarm, and they work by detecting the presence of smoke in the air. Sprinklers are less common, but they are more effective at putting out fires. 


Fire Detection System


There are two main types of fire detection systems: those that use smoke detectors and those that use heat detectors. 
  • Smoke detectors work by constantly monitoring the air for particles of burning material, such as smoke, fumes or ashes. They come in two main types: ionization and photoelectric. 
  • Ionization smoke detectors work by detecting the presence of ions in the air, which are created when smoke particles enter the detector. 
  • Photoelectric smoke detectors work by detecting the presence of light particles in the air, which are created when smoke particles enter the detector. 
  • Heat detectors, on the other hand, have sensors that measure changes in temperature. 


Both types of systems have their advantages and disadvantages, which should be considered when choosing a system for a particular building. 


Smoke detectors are more sensitive than heat detectors and will therefore pick up fires at an earlier stage. This can give people more time to evacuate before the fire spreads and becomes dangerous. 


However, smoke detectors can also be triggered by other things besides fires, such as cooking fumes or dust particles, which can cause false alarms. Heat detectors, on the other hand, are not as easily triggered by non-fire-related things but they may not pick up the fire until it has already spread somewhat through a room or area. 


When choosing a fire detection system for a building, it is important to consider its purpose and how likely it is to experience false alarms. In some cases, a combination of both smoke and heat detector systems may be necessary to provide sufficient coverage and avoid disruptive false alarms.


Sprinklers

Sprinklers come in two main types: wet pipe and dry pipe. 


  1. Wet pipe sprinklers have water stored in them at all times, so that they can immediately begin spraying water when a fire is detected. 
  2. Dry pipe sprinklers have a valve that prevents water from entering the piping until a fire is detected, at which point the valve opens and water flows into the piping.



Advantages of Fire Detection and Alarm Systems


A well-designed and installed fire detection and alarm system is an important part of a building’s fire safety system. 
  1. Fire detection and alarm systems can provide early warning of a developing fire, allowing occupants to safely evacuate the premises before the fire spreads. 
  2. In many cases, automatic sprinkler systems are also linked to the fire detection and alarm system so that they activate when a fire is detected, suppressing or extinguishing the fire before it has a chance to spread. This can significantly reduce damage to property as well as the risk of injury or death. 


Conclusion


The decision of whether to install a fire detection and alarm system and which type of system to choose depends on many factors.  Cost, the likelihood of false alarms, the need for spray suppression or extinguishing, and the risk of tampering are all important considerations. With so many different types of systems on the market, it is advisable to seek professional advice to ensure you select the most suitable option for your needs. 

Do Not Keep Your Fire Escape Plans a Secret

Posted on by palladiumSS_blog
Fire outbreaks are not new; even if a building has top-notch fire preventive measures, there is some loss of property and even lives. More than the property, lives are important, and the people themselves can make their way out before a fire outbreak with the right training. 


Each commercial building must have Fire Safety Equipment and fire escape plans that can help people keep themselves safe. However, it is not good to post it somewhere where no one can read it or even see it. Everyone working there should know about the fire escape plans and hence it should not be kept a secret. 



In this article, we have highlighted some places where you can post the fire escape plans so a maximum number of people can read them. Now let’s get started. 


Elevators 

Daily, a lot of people use elevators, and it becomes a habit. However, during fire outbreaks, it’s not a good idea to use elevators as they might stop within some time, leaving the people strangled inside.  Therefore, the fire escape plans should be posted near elevators to prevent people from using them and guiding them towards the exit.  

Break Rooms 

There will be no worker who has never visited the break room once at any workplace. Therefore, the breaks rooms or even the washrooms are the best places to post-fire escape plans.  Most people take a break, nap, have lunch there, and will have a lot of time to read those fire escape plans and most probably remember them. Hence, it’s better to post the fire escape plan there. 

Working Place

The working place is the best to post the fire escape plans, as the people in any office will be there most of the time. However, not everyone has time to read those plans if in case any fire detection system detects fire outbreak, every worker can at least read those and can make their way out to a safer location. 

Near the Main Entrance 

As most of the visitors come through the main entrance of any building, the fire escape plans must be posted there. People waiting for someone have a lot of time and will read those instructions and at least know what should be done during fires. 

Where the Exit is Not Seen 

In any office setting, there are some points where the exit cannot be seen, and if there is no direction given, people may get panicked. To avoid this, there should be fire escape plans posted over there with the direction towards the exit so people can easily evacuate the building. 

Conclusion 

Like a Fire alarm system, fire escape plans are crucial for keeping people out of danger in a building. Hence, every building should have one. And if they have one, the plan should be posted on every prime location so everyone can read and remember them easily. Hence, do not keep your fire escape plans a secret so everyone can be safe. Lastly, we hope you have found the information you were searching for, and it was useful for you. 

How to Create a Fire Evacuation Plan

Posted on by palladiumSS_blog
An appropriate strategy in place when a fire breaks out could save many lives and property. A fire risk assessment helps you to maintain the safety and standard in your building that include Fire Detection System, Fire Control Panel. Still, a fire evacuation plan is also crucial for any premises to save lives. As the responsible person for your building, it is your responsibility to install and execute a safe evacuation plan in any emergency. Read out the whole article to know how to create a fire evacuation plan.

Also Read: Fire Safety for Renters: Protecting Your Home and Belongings


What is a Fire Evacuation Plan?

A fire emergency evacuation plan (FEEP) is the actions to be followed upon a fire being discovered or an alarm raised. This plan should be easy to understand to be easily adopted. Some strategies are:
  • A Simultaneous evacuation where everyone exits the building
  • To avoid a bottleneck in the escape routes, vertical phased evacuation where only floors at immediate risk are evacuated.
  • Staff Alarm evacuation so that staff can adopt the best plan to safeguard the lives in the building.

What Should be Included in a Fire Evacuation Plan?

It generally depends on the building you have, but there are many key ingredients that all plans must include.
  • Passageways for all escape routes should be clear and accessible.
  • Clear signage for escape routes
  • Emergency doors should be kept in good working order
  • Adequate routes and exists for the number of people
  • Fire safety training for the employees to adopt the best and safe plan.
  • A designated safe meeting point away from the building

Fire Evacuation Plans for…

Schools

In schools, Fire drill training to students helps them prepare for any emergency case. This allows all the students not to panic and safely exit the building. The evacuation plan must be according to the number of students. Those with disabilities or mobility issues should also be considered while designing the escape plan. Also, check out the best fire extinguishers that can help you deal with separate fires.

Hotels

Depending on the hotel or accommodation size, the plan and procedure differ. All hotels have one thing in common: guests are unfamiliar with the building. This means it requires clear signage so that guests won’t find any difficulty while escaping the building.

Hospitals

Hospitals need special attention to check whether there is compartmentalization to protect vulnerable patients and residents who cannot move without support. Even in hospitals, signs should be displayed clearly. Also Read: How Can You Help Fire Safety In Your School?

Evaluate Your Plan for Those With Disabilities

Your fire evacuation plan should cater to all people, including people with disabilities. There are several factors to be considered, from hidden disabilities to mobility issues. A personal emergency evacuation plan (PEEP) must be needed to ensure that all people working in the building feel safe. Especially for hospitals and care homes, Fire evacuation plans need exceptional guidance and attention.

10 Common Fire Extinguisher Mistakes You Should Avoid

Posted on by palladiumSS_blog
While fire extinguishers are designed to be user-friendly, people still make some common mistakes when using them. To ensure that you know how to use a fire extinguisher properly, avoid these mistakes:
  • Not knowing How to Use the Fire Extinguisher: One of the most common mistakes people make is not knowing how to use the fire extinguisher. This is a serious mistake, as it can mean the difference between putting out a fire and making it worse. Make sure to familiarize yourself with the fire extinguisher before using it.
  • Using the Wrong Type of Fire Extinguisher: Another common mistake is using the wrong type of fire extinguisher. There are different types of fire extinguishers for different types of fires. Make sure to check the label on the fire extinguisher to ensure that you are using the right type.
  • Not Aiming the Fire Extinguisher Properly: Another common mistake is not aiming the fire extinguisher properly. When using a fire extinguisher, you need to aim the nozzle at the base of the fire. This will ensure that the extinguishing agent is delivered to the source of the fire.
  • Not Using the Fire Extinguisher Properly: Another common mistake is not using the fire extinguisher properly. Make sure to follow the instructions on the fire extinguisher. This will ensure that you are using it correctly.
  • Not Having the Fire Extinguisher in the Right Place: Another common mistake is not having the fire extinguisher in the right place. Make sure to keep the fire extinguisher in a location that is easily accessible in the event of a fire.
  • Not Reading the Instructions: Even if you think you know how to use a fire extinguisher, it’s important to read the instructions before using it. The instructions will tell you the best way to use the fire extinguisher for the situation you’re in.
  • Not Maintaining Fire Extinguishers: Just like any other piece of equipment, fire extinguishers need to be regularly maintained. Check the pressure gauge to make sure the fire extinguisher is fully charged. Inspect it for any damage, and make sure the nozzle is not obstructed.
  • Using it too Late: One of the most common mistakes people make with fire extinguishers is waiting too long to use them. If you wait until the fire is out of control, it will be too late. If you see a fire, use your fire extinguisher right away.
  • Using it When it’s not Needed: Even though fire extinguishers are designed to be user-friendly, people still make some common mistakes when using them. Sometimes people use fire extinguishers when it’s not necessary, such as when there’s a small fire that could easily be extinguished with water. If you’re not sure whether or not you should use a fire extinguisher, err on the side of caution and don’t use it.
  • Forgetting to Recharge or Replace it: Another mistake people make is forgetting to recharge or replace their fire extinguishers. Just like any other piece of equipment, fire extinguishers need to be regularly maintained. If you use your fire extinguisher, make sure to recharge or replace it as soon as possible. By doing so, you’ll be prepared in the event of a future fire.

Final Words

While fire extinguishers are a great tool to have in the event of a fire, it’s important to be familiar with them before using them. There are some common mistakes that people make when using fire extinguishers, such as using the wrong type, not aiming properly, and not using them properly. Make sure to familiarize yourself with fire extinguishers before using them, so that you can use them correctly in the event of a fire.